ZXF8044 Explosion Proof Corrosion Resistance Control Panels (IIC,TD

Application

* Designed for explosive atmospheres Zone 1 and Zone 2

* Designed for combustible dust Zone 21 and Zone 22

* Designed for IIA, IIB and IIC groups explosive atmospheres

* Designed for temperature classifications T1~T6

* Designed for explosive hazardous locations such as oil refinery, storage, chemical, pharmaceuticals,militaryindustries, etc

* Widely used in electrical control circuit; Different types can be designed as per electrical systematic drawing.

Ordering References

If no special requirements, the red button will be equipped with normal closed contact, the green and yellow buttons with normal open contact, and emergency stop button is equipped with a normal closed contact. If there is any different requirement, users need to supply diagram or indicate the contact type and quantity;

Cable entry can be produced as per request;

Standard ordering：

     ZXF8044-BADKR()

     B-/ … ( re fe r to P 222 )

     A-()/ …(refer to P224)

     D-()/ …(refer to P225)

     K-/ …(refer to P226)

     R-(/)/ …(refer to P228)

Technical Parameters

Compliance with:

     GB 3836.1, GB 3836.2, GB 3836.3, GB 12476.1, GB12476.5

     IEC60079-0, IEC60079-1, IEC60079-7, IEC 61241-0, IEC 61241-1

Explosion protection:

     Ex d e IICT6 Gb

     Ex tD A21 IP65 T80℃

Rated voltage: AC 220/380V 

Rated current: 10A

Using sorts: AC-15 DC-13

Ingress protection: IP65

Corrosion resistance: WF2

Cable entries: G3/4″~G1″

Cable outer diameters: Φ13mm~Φ24mm