SIEMENS SITRANS FX330

SITRANS FX is your all-in-one vortex solution for volumetric and mass flow measurement of steam, gases and liquids – and so much more. These reliable all-rounders integrate flow, pressure and temperature monitoring into one user-friendly, 2-wire device. You benefit from enhanced energy and process efficiency, greater accuracy and significant cost savings.

Details

Nominal size flanged version: From DN15 to DN300 (½” to 12”)

Nominal size sandwich version: From DN15 to DN100 (½” to 4”)

Process values: Volume flow, Mass flow, Corrected volume flow, Density, Temperature, Pressure, Heat energy

Accuracy

     Steam and gases: +/- 1%

     Liquids: +/- 0.75%

Current output: 4 - 20 mA HART (loop powered)

Digital output: Pulse (max. 1000 Hz), frequency, status, limit switch

Communication: HART 7, Profibus PA and Foundation Fieldbus in preparation

Pressure rating: PN 10 – 100; Class 150 - 600

Medium temperature: From -40 to 240 °C (-40 to 464 °F)

Material sensor: Stainless steel 1.4404 (316L), Hastelloy C22 on request

Transmitter enclosure: Die-cast aluminum

Enclosure rating: IP66 / 67 (NEMA 6)

Connection

     EN 1092-1; ASME B16.5

     Wafer design (centering rings included)

Remote transmitter: Connection cable up to 50m (164 ft), remote version in preparation

Temperature sensor: Standard integrated temperature sensor

Pressure sensor: Optional integrated pressure sensor with or without isolation valve

Display and keypad: High-resolution graphical display and 4 operating keys (alternative use magnet pen)

Ex Approvals

      ATEX II2 G Ex ia - QPS IS Class I Div.1 - IECEx II2 G Ex ia

      ATEX II2 G Ex d - QPS XP Class I Div.1 - IECEx II2 G Ex d

      ATEX II3 G Ex nA - QPS NI Class I Div. 2 - IECEx II3 G Ex nA

      ATEX II2 D Ex tb - QPS DIP Class II, III Div. 1 - IECEx II2 D Ex tb

Safety integration level (SIL): SIL2 according IEC 61508

Benefits

• No wear - Stainless steel construction with high resistance to corrosion, pressure and temperature
• Useable in hazardous areas - SIL2 certified according to IEC 61508 Edition 2
• Space-saving installation - Integrated reduction of nominal diameter for economic installation
• Redundant data management - Exchange of electronics without loss of calibration and configuration data
• Advanced energy management - Gross and net heat calculation